Wheel bearing with magnetic encoder: how to match it
How do you spot the encoder on the old bearing?
Ask the technician which face was toward the sensor and whether the encoder is integrated into the bearing or the vehicle uses a separate target. NTN-SNR shows a magnetic test card for identifying the encoder face on its ASB bearings. Have the workshop use the supplier’s instructions when identifying a loose part.
What distinguishes two catalog entries?
Select the VIN and the axle position. Compare the OE numbers, bearing or hub assembly type and notes about ABS or equipment. If the listing uses only dimensions, ask the supplier for written confirmation of the encoder and vehicle application. A photograph of a black seal is weak evidence of what is inside.
What should arrive for that corner of the car?
Confirm whether the pack contains the bearing or a complete hub, and whether the required lock ring, axle nut or fasteners are supplied. Have the technician confirm installation orientation from the applicable instructions. Keep the pick list alongside the job so any missing hardware is caught at receiving.
Frequently asked questions
Does an ABS sensor come with an encoder bearing?
Check the kit contents. The encoder provides the target that the vehicle’s sensor reads, and the sensor can be listed separately.
Can I select the bearing by its dimensions?
Use the OE reference and fitment conditions as well as the dimensions. Confirm the encoder type and axle position.