English
Codes and parts identification · 5 min read

Headlight part numbers: LHD, RHD and traffic direction

Does left-hand headlight mean a lamp for left-hand traffic?

No. A left-hand headlight describes a mounting position on the vehicle. Left-hand traffic describes which side of the road vehicles use. Write these as separate fields in the supplier enquiry so a shorthand description such as left lamp cannot be mistaken for a traffic specification.

HELLA explains the asymmetric dipped-beam distribution used to illuminate the relevant road edge while limiting glare. That optical requirement is why a physically similar imported lamp needs its exact application checked. Steering position can provide context, but it should not replace the traffic specification in the catalog.

How do you identify the right lamp for an imported vehicle?

Use the original vehicle specification in the manufacturer catalog. In an Audi enquiry, open the Audi parts catalog and retain the lighting equipment and complete reference. Keep the original market and the intended country of operation visible when those differ.

Ask the repairer to confirm any conversion or market-compliance requirement through the appropriate technical information. A travel setting, masking instruction or diagnostic change should not be assumed to turn any lamp into a permanently suitable replacement. Check what the actual lighting system and local approval require.

What does complete headlight mean in the supplier offer?

Ask for an itemised description of included control units, light sources, covers and mounting components. A bare lamp housing and a unit supplied with electronics can carry very different prices. Retain the supplier’s contents statement rather than relying on a photograph that may show optional attachments.

Check each module’s complete reference if the workshop plans to transfer it from the damaged lamp. A familiar connector or matching outer shape cannot confirm electronic compatibility. The fitting plan should also identify any required coding, basic settings or headlight adjustment in the applicable repair procedure.

What should a body shop approve before purchase?

Send the VIN, mounting side, full lamp reference, lighting equipment, traffic application and required supplied modules together. Where the damaged label is readable, attach its complete photograph. State whether the quotation assumes reuse of any component so the estimator can check that assumption against the damage.

At delivery, compare the full package reference and included modules before the booked repair. Record any supplier substitution and recheck its application. Keep the parts approval with the estimate and leave the fitting, calibration and beam-setting requirements with the technician’s repair instructions.

Frequently asked questions

Are LHD and left-hand traffic the same thing?

No. LHD means left-hand drive, describing the steering position. Left-hand traffic describes road use. Mounting side is another separate detail.

Does a complete headlight always include its control modules?

Do not assume so. Confirm the supplied modules and other components in the supplier’s written contents statement.

VINsearch parts desk

Published by the VINsearch parts desk. Check the sources listed with each article and confirm the vehicle record and part application in the manufacturer’s catalog before ordering.

Identify the right part the first time

Official manufacturer catalogs, by VIN, in one login. From $5 a day, with no installation or per-search fees.

Get started Instant access · 65 countries
From $5/day Get Access Now
VINGOAI catalog assistant